Nowadays, all kinds of laser cutting equipment have been widely used. Many consumers have heard about the marking machine and learned about the laser cutting machine and gradually understand that they have entered the option to buy, but what affects the p... [details]

At present, optical cutting machine manufacturers can produce various types of laser cutting machine products, including high-quality thin-plate laser cutting machines. At present, due to the outstanding cutting advantages of the reputable thin plate lase... [details]

If you are using a common water cooling device (water pump), we recommend replacing the water and circulating water in the bucket once a week... [details]

a. First of all, it is necessary to avoid equipment such as strong magnetism and strong electricity that seriously affect the signal transmission of the engraving machine. Such as: welding machine, launch tower, etc. b. Secondly, it is required that... [details]

The laser cutting machine uses the laser beam emitted from the laser generator to focus on the laser beam irradiation condition of high power density through the optical path system. The laser heat is absorbed by the workpiece material and the temperature... [details]

Second, the two support points of the laser tube should be at the point of 1/4 of the total length of the laser tube, to ensure that the flow rate of the cooling water is 2L-4L/min; otherwise, the effect is not good, it will cause mode jumping, and the li... [details]